background image

Object and Liquid entry-Care should be taken so that objects do not fall and liquids are not spilled into the 
housing. 
Damage Requiring Service-The appliance should be serviced by qualified service personnel when: 

 

The Power-supply cord or the plug has been damaged; or   

 

Object have fallen or liquid has been spilled into the appliance; or 

 

The appliance has been exposed to rain ; or 

 

The appliance does not appear to operate normally or exhibits a marked changed in performance ;or 

 

The appliance has been dropped or the housing damaged. 

Servicing-The user should not attempt to service the appliance beyond that described in the operating 
instructions. All other servicing should be referred to qualified service personnel. 
Do not take the unit apart. The laser beam used in the unit could harm your eyes. 
Do not insert pins or other objects inside the unit . This unit is equipped with a safety device which 
automatically turns the laser beam off when the disc compartment is opened. If a pin or other metal 
objects get inside the unit, this safety device may be deactivated. 
 Do not drop the unit or subject it to strong shocks. Doing so could result in damage. 
Do not place the unit in the following: 

     Locations where the temperature is high . The unit’s housing may warp or the unit may otherwise be 

damaged if it is placed in direct sunlight, near heaters (where the temperature is 140

0

F/60

0

C or greater) or 

in cars with the windows closed. 

 

In humid or dusty locations 

 

In locations exposed to heavy vibrations 

 

On unstable or tilted surfaces. 

 

CAUTION:  

*  

This product is equipped with a polarized plug (one blade is wider than the other blade) as a safety feature 
to reduce the risk of electrical shock. This plug will fit into a polarized outlet only one way. This is a 
safety feature. If you are unable to insert the plug into the electrical outlet, try reversing the plug. If the 
plug still does not fit, contact a qualified electrician. Never use the plug with an extension cord unless the 
plug can be fully inserted into the extension cord. Do not alter the plug. Do not attempt to defeat the 
safety purpose of the polarized plug, 

*    Use of controls or adjustments or performance of procedures other than those specified herein may result 

in hazardous radiation exposure. 

 
 

SAFETY CERTIFICATION 

This Compact Disc Player is made and tested to meet the safety standards of the Federal Communications Commission(FCC) 
and to comply with the safety performance requirements of the U.S. Department of Health and Human Services and with the 
Food & Drug Administration(FDA) Radiation performance Standards 21 CFR Subchapter J. 
 

Summary of Contents for SCR2608




















Reviews: