background image

18

Troubleshooting

PROBLEM                            SOLUTION

No sound or  
distorted sound

Make sure the machine is connected properly. 
Make sure all cables are securely inserted into 
the appropriate jacks.

The icon      
appears on  
screen

Can't advance 
through a movie

Picture is distorted

No forward or
reverse scan

You can't advance through the opening credits 
and warning information that appears at the 
beginning of movies because the disc is 
programmed to prohibit that action.

The feature or action cannot be completed at 
this time because:
1.  The disc's software restricts it.
2.  The disc's software doesn't support the 
     feature (e.g., angles)
3.  The feature is not available at the moment.
4.  You've requested a title or chapter number 
     that is out of range.

Some discs have sections that prohibit rapid 
scanning or chapter skip;
If you try to skip through the warning information 
and credits at the beginning of a movie, you 
won't be able to. This part of the movie is often 
programmed to prohibit skipping through it.

The disc might be damaged. Try another disc;
It is normal for some distortion to appear during 
forward or reverse scan.

Owing to continuous improvement, no prior notice will be given regarding changes on above
 feature and spec. 

Summary of Contents for SDVD7027












Reviews: