background image

OPERATION INSTRUCTIONS

To Repeat one Track of CD : 

1.

Press the POWER Button to turn on your unit, and then rotate the FUNCTION 

Knob to CD position. The CD track "--" appears on the display. 

2.

Insert a CD into the CD tray. Press the PLAY Button to start playing. 

3.

Press the REPEAT Button once and "REP" will appear on display. The selected 

track will play and repeat until you press the STOP button control. 

NOTES: This operation also applies to CD program playback. 

To Repeat an Entire CD (All Track): 

1.

Press the POWER Button to turn on your unit, and then rotate the FUNCTION 

Knob to CD position. The CD track "--" appears on the display. 

2.

Insert a CD into the CD tray. Press the PLAY Button to start playing. 

3.

Press the REPEAT Button twice and "REP ALL" will appear on the display. All 

tracks of the disc will be repeated. To stop the disc play, press the STOP button 

control.

NOTES: This operation also applies to CD program playback.

CD Playing Randomly (Remote Control) 

1.

Press the POWER Button to turn on your unit, and then rotate the FUNCTION 

Knob to CD position. The CD track "--" appears on the display. 

2.

Insert a CD into the CD tray. Press the PLAY Button to start playing. 

3.

Press the RANDOM Button once and "RAND" will appear on display. The 

selected mode will be playing randomly until you press the STOP button control. 

11

Summary of Contents for SKCR2613
















Reviews: