Sylvania SKCR2713-AM, Instruction Manual

OPERATION

GENERAL OPERATION:

ACTUAL TIME SETTINGS:

1. Connected the unit to AC power as instructed earlier. The Red  

  Indicator will illuminate.

2. Press the   Button on the unit or Remote Control to power on the   

  unit from standby mode. The Red Indicator will not light and the LCD  

  Display will illuminate.

3. Press the FUNCTION Button on the unit or Remote Control    

  repeatedly to select the playback source.

4. Press the VOL +/- Buttons on the unit or the VOL DN/UP Buttons on the 

  Remote Control to adjust volume level as desire.

5. When finished listening, press the   Button on the unit or Remote  

  Control to turn off (standby) the unit. The Red Indicator will illuminate. 

To set or reset the actual time:

1. In power off (Standby) mode. Press and hold the P-MODE/CLK SET   

  Button on the unit or Remote Control approximate 2 seconds until the  

  digit of Hour on the LCD Display is blinking. 

2. Press the   or   Button on the unit or Remote Control repeatedly to    

  set hour. (Make sure the PM Indicator appear on the display if the    

  time is PM and the AM Indicator is appear on the display if the time is  

  AM).

3. Press the P-MODE/CLK SET Button again, the digit of Minute will    

  blink.

4. Press the   or   Button repeatedly to set minute.

5. When finished, press the P-MODE/CLK SET Button to save the  

  settings and exit. The display will stop blinking.

7