- 21 -
EN
01A11
3
Begin OTR
Press the REC/OTR button on the
TV/VCR as many times as needed.
The recording length will be deter-
mined by the number of times you
press the REC/OTR button. Each
additional push will increase the recording time by
30 minutes. It is set up to 8 hours.
OTR(2 : 30)
SP
Avoid overlap of programs ...
There is a chance that a program will not be record-
ed. When programs overlap:
•
The program with the earliest start time will record
first.
•
Once the earliest program finishes recording, the
overlapping programs will record in the order of
the program number.
•
The illustration below demonstrates the sequence
of recording.
1
Select “TIMER PROGRAMMING”
Press the MENU button on the remote control.
Confirm “TIMER PROGRAM-
MING” is pointed to by pressing
the PLAY/
K
button.
Press the F.FWD/
B
button.
•
If you have not yet set the clock,
“MANUAL CLOCK SET” appears. If so, follow
stops [3] to [8] on page 11. Then set the timer
recording.
2
Select your desired program position (1~8)
Press the PLAY/
K
or STOP/
L
but-
ton to select the desired program
position.
Then, press the F.FWD/
B
button.
3
Set the channel number
Press the PLAY/
K
or STOP/
L
but-
ton until the desired channel num-
ber appears.
(Example: CH61)
Then, press the F.FWD/
B
button.
Remember:
If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to channel 3 or 4 to
match the output channel of the box.
4
Select once, every day or weekly recording
For once recording :
Press the PLAY/
K
(up) button
until the desired date appears.
(Example: “7/06” for July 6th).
Then, press the F.FWD/
B
but-
ton.
For every day recording : To record a TV program at
TIMER RECORDING
9:00AM
10:00AM
12:00PM
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
11:00AM
Recording Sequence
*Recording period is SHADED
You may set the TV/VCR to start and end a record-
ing while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.
In the example below, the timer is being set to record:
DATE:
July 6th, 2001
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL:
CH61
TAPE SPEED:
SP
Make sure ...
•
If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to channel 3 or 4
to match the output channel of the box.
•
Clock is set to the correct time and date before set-
ting the timer.
•
TV/VCR power is turned on to program it.
•
To insert a cassette tape with its erase prevention
tab in place. (If necessary, rewind or fast forward
the tape to the point at which you want to begin
recording.)
•
To set the channel you want to record
– M E N U –
B
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/06 FRI
-:- -
-:- - - -
- -
-/- -
- - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
Push(es)
Display
Recording length
1 push
(continuous recording)
2 pushes
0:30
30 minutes
3 pushes
1:00
60 minutes
4 pushes
1:30
90 minutes
17 pushes
8:00
480 minutes
T5214.QX3 01.2.21 6:56 PM Page 21
