- 14 -
EN
1C29
ANT.
AUDIO OUT
COAXIAL
Front speaker
(left)
Center
speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
DIGITAL AUDIO OUT
COAXIAL
To COAXIAL DIGITAL
AUDIO INPUT jack
Receiver with Dolby
Digital decoder
[Fig. 7]
CONNECTING TO RECEIVER WITH A DOLBY DIGITAL DECODER
(for DVD)
If using this TV/VCR/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the
TV/VCR/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hook-
ing the TV/VCR/DVD up to a Dolby Digital decoder, you can enjoy a more convincing, realistic surround
sound as enjoyed in movie theaters.
Use audio coaxial digital cables available at retail stores for the audio connection.
NOTES:
•
Be sure to turn off the power to all components in the system before connecting them together.
•
Refer to the Owner's Manuals for the components to be connected to the TV/VCR/DVD.
•
If connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in
the setup mode. (See page 45 to set DOLBY DIGITAL to ON.)
•
Unless connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio out-
put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion and may also
damage the speakers.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
T1055UF_EN(p1-35).QX3 04.6.7 2:28 PM Page 14