CONTROLS AND FUNCTIONS
CAMERA
1. LENS
B&W CMOS Image sensor
2. MICROPHONE
Built-in condenser microphone provides
audio capability from camera to monitor/
television
3. 6 INFRA RED LED’s
- Enhances
picture quality in low light conditions.
4. 2.4 GHz ANTENNA
High gain dipole antenna sends
Audio and Video signal to the
monitor.
5. STAND MOUNTING SOCKET
Reinforcement lock for camera stand.
6. CHANNEL SELECTOR SWITCH
Slide switch for the channel 1-4 selection.
7. ON/OFF POWER SWITCH
Controls power to the camera. Note:
Please ensure you set the switch to the
OFF position before plugging the
AC adapter into the unit.
8. DC IN JACK
Plug the 12V DC (500mA) Adapter in here.
5
SIDE VIEW
FRONT VIEW
10
MULTIPLE CHANNEL OPERATION
AUTO AND MANUAL VIEWING OPTIONS
This system is preset to Manual mode, with a dwell mode of 2 seconds.
In Auto mode, the LED light will be ON.
To manually view a specific camera location, press the Auto/Manual
button. Press the Ch. Select key to view the desired camera location.
Press the Auto/Manual button to return to the Auto Mode feature.
* NOTE: In the event of a power failure or a power breakdown, your
system will automatically switch back to Channel 1.
SELECTABLE DWELL SETTING
This system provides you the option of three selectable dwell options (2,
5 and 10 seconds) when set to Auto Mode. This system is preset to two
second selection.
Changing Dwell Mode
1.
Press and hold the CH select button. The LED button will turn on
to indicate that it is set to 2 seconds.
2.
Continue to press and hold the CH select button. The LED button
will flash at a one second interval to indicate that it is now set to
the 5 second interval
3.
Continue to press and hold the CH select button. The LED button
will flash three times to indicate it is set to the 10 second interval.
6
4
5
7
8
1
2
3
