Competitor Product Comparison
Confidential
– for internal use only
SAFETY PRECAUTIONS:
IMPORTANT: READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN FOR FUTURE REFERENCE.
GENERAL:
Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delive ry carrier.
2x2
Non-EM
EM
2x4
Non-EM
EM
EM :
With Emergency unit
Non-EM:
Without Emergency unit
INSTALLATION:
1.
Disconnect power to fixtures.
2.
Remove ceiling tile(s) where the Volumetric Troffer will be installed.
3.
Prepare luminaire by opening back plate to electrical box and removing the appropriate knock out. (See Fig. 1)
4.
Raise luminaire into hole in the ceiling, above the 15/16” or 9/16” T -bar. (See Fig. 2)
5.
Slowly rest luminaire on T-bar and make sure the luminaire fits appropriately before wiring.
6.
Locate all four earthquake clips on back of luminaire. Twist each tab away from luminaire resting them on the T -bar. This will hold the luminaire
in place. (See Fig. 3)
Figure 1
Figure 2
Figure 3
