INSTALLATION:
7.
To make electrical connections open an adjacent space in the ceiling (See Fig. 4).
8.
Open the connection area as shown and connect the incoming electrical wires to the set of power wires black to black (hot), w hite to white
(neutral) and green to green (ground). (See Wiring Diagram 1 and Fig.5)
For Emergency Battery Backup:
See page 4 for instructions to connect emergency battery backup, and testing.
9.
For dimming wire connections, make sure to connect same wire color indications together. ( See Wiring Diagram 2 and Fig. 5). For adding wall
dimmer, read page 4.
10. Close and secure the connection area.
11. If desired, attach safety cable (provided by others) through hole in top of housing.
12. Installation is now complete. Turn on the power at circuit breaker or fuse box then turn the light switch to power the fixture.
Wiring Diagram 1
Figure 4
Black (Hot)
Black (Hot)
Green (Ground)
White (Neutral)
Green (Ground)
White (Neutral)
To Luminaire
Figure 5
Wiring Diagram 2
0-10V Dimmer Wiring
Purple/Black (+)
Purple/Black (+)
Gray/White (-)
Gray/White (-)
To Luminaire
In
co
m
in
g
E
le
ct
ri
ca
l W
ir
e
s
In
co
m
in
g
D
im
m
in
g
W
ir
e
s
Volumetric Troffers are environmentally preferable LED alternatives to
traditional fluorescent lens troffer luminaires, offering up to 55% in energy
savings. They are offered in two sizes and are ideal for illuminating offices,
retail or hospitality areas.
