8
Fuel Gauge
：
The pointer in this gauge shows how much fuel remains in the tank.
The pointer stays in “E” position when key switch is turned to “OFF.”
Engine Oil Change Indicator
：
This indicator shows when to change engine oil by colors. Usually, the indicator will be in green. But it
will be in red color when the motorcycle has been driven approximately 1,000 km. Then, it means you
should add or change the engine oil. After replacing the engine oil, please insert the key into the relief
hole as shown on the right. The indicator will then turn from red to green.
Zero reset button
1. Operate the zero reset button regularly.
2. To reset to zero, simply press the button.
The button will spring back to its original
position when released.
OPERATION OF IGNITION SWITCH
“Start” position
Engine can be started in this position.
Ignition switch key can not be removed.
“Stop” position
Engine is shut off and can not be started in this
position.
Ignition switch key can be removed.
“Steering handle lock" position
Turn the steering handle to left and press ignition
switch key down and then lightly turn it to left to the
“LOCK” position.
The steering handle is locked in this position.
Ignition switch key can be removed.
When unlocking, simply turn the key from “LOCK” to “OFF.”
IGNITION SWITCH
ON
OFF
LOCK
CAUTION:
Never operate the ignition switch key when the motorcycle is running. To turn the ignition
switch to “OFF” and “LOCK,” will shut off the electrical system and that may result in a
dangerous accident. Therefore, the ignition switch can only be turned off after the motorcycle
has been completely stopped.
Always remove the key and be sure to take the key away with you after locking the steering
handle before leaving your motorcycle.
If ignition switch remains in the “ON” position for a prolonged period after the engine has been
stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability.
Make sure to take the key away with you before you lock your seat.
Key
