2. MAINTENANCE INFORMATION SYM
2-2
PERIODICAL MAINTENANCE SCHEDULE
Mainte
nance
Code
Item Initial
300KM
1 Month
Every1000KM
3 month
Every3000KM
6 month
Every6000KM
1 year
Every12000K
M
1
☆
Air cleaner
I C C
R
2
☆
2nd air jet leaner
I C C
R
3
☆
Fuel filter
I I R
4
☆
Oil filter
C C C
5
☆
Engine oil change
R
Replacement for every 1000km
6
Tire pressure
I I
7
Battery inspection
I
I
8
Brake & free play check
I
I
9
Steering handle check
I
I
10 Cushion operation check
I
I
11
Every screw tightening check
I
I
12
Gear oil check for leaking
I
I
13
☆
Spark plug check or change
I I R
14
☆
Gear oil change
R
Replacement for every 5000km
15 Frame lubrication
L
16 Exhaust pipe
I
I
17
☆
Ignition timing
I I
18
☆
Emission check in Idling
A I
19
☆
Throttle operation
I I
20
☆
Engine bolt tightening
I I
21
☆
CVT driving device (belt
﹞
I
R
22
☆
CVT driving device (roller)
C
23 Lights/electrical equipment/mutli-meters
I I
24
Main/side stands & springs
I I
25 Fuel pipes
I I
27 Cam chain
I I
28
☆
Valve clearance
I A
29
☆
Crankcase vapor control System
I C
30
☆
Crankcase blow-by over-flow pipe
I
Replacement for every 2000km
31
☆
2nd air jet system
I I C
32
☆
vapor control system
I
Code: I ~ Inspection, cleaning, and adjustment R ~ Replacement C ~ Cleaning (replaced if necessary) L ~ Lubrication
Have your motorcycle checked, adjusted, and recorded maintenance data periodically by your SYM Authorized Dealer to
maintain the motorcycle at the optimum condition
The above maintenance schedule is established by taking the monthly 1000 kilometers as a reference which ever comes
first.
Remarks:
1. These marks “
☆
” in the schedule are emission control items. According to EPA regulations, these items
must be perform normally periodical maintenance following the use r manual instructions. They are
prohibited to be adjusted or repaired by unauthorized people. Otherwise, SYM is no responsible for the
charge.
2. Clean or replace the air cleaner element more often when the motorcycle is operated on dusty roads or in the
Heavily- polluted environment.
3. Maintenance should be performed more often if the motorcycle is frequently operated in high speed and after the
motorcycle has accumulated a higher mileage.
4. Preventive maintenance
a. Ignition system - Perform maintenance and check when continuous abnormal ignition, misfire, after-burn,
overheating occur.
b. Carbon deposit removal - Remove carbon deposits in cylinder head, piston heads, exhaust system when power is
obvious lower than ever.
c. Replace worn out pistons, cylinder head.
http://www.motorcycle.in.th
