13
7. Use of each component
OPERATION OF IGNITION SWITCH
“ON” position
Engine can be started in this position.
Ignition switch key can not be removed.
“OFF” position
Engine is shut off and can not be started in this
position.
Ignition switch key can be removed.
“LOCK” position
Turn the handle all the way to left, then press
down the key and turn the key to the “LOCK”
position on the left.
In this position, the handle is locked and the
key can be removed.
To unlock, simply turn the key from “LOCK” to
“OFF”.
CAUTION:
Never operate the ignition switch key when the scooter is running. To turn the ignition switch to
“OFF” and “LOCK,” will shut off the electrical system and that may result in a dangerous accident.
Therefore, the ignition switch can only be turned off after the scooter has been completely stopped.
Always remove the key and be sure to take the key away with you after locking the steering handle
before leaving your scooter.
If ignition switch remains in the “ON” position for a prolonged period after the engine has been
stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability.
IGNITION SWITCH
Summary of Contents for JET 100 series
Page 1: ...OWNER S MANUAL...
