SYMEN 2008/09
14. Postscript
32
FUNCTION
：
Set time in 12 hour mode
There are three buttons on the speedometer, explanation as below :
1. SET button “S”:
a. Under TRIP mode, press “S” button continuously to reset the TRIP kilometer readings.
b. Under ODO mode and the vehicle is standing still, press SET for above 2 seconds to enter CLOCK
mode. Press “S” button shortly to enter time setting mode.
CLOCK + HOUR
CLOCK + MIM (10 MIN.)
CLOCK + MIN ( 1 MIN.)
(flashing)
(flashing)
(flashing)
c. Under CLOCK mode, press “M” button shortly to increase the readings, once per one time.
d. Under time setting mode, press “S” button continuously to exit this setting mode.
2. MODE button “M”:
a. Press “M” button to change between “TOTAL””TRIP””CLOCK” modes.
TOTAL
TRIP
CLOCK
b. When the engine oil lamp lights on, press “M” button continuously to put it out.
c.
The readings will remain there after main switch is turn off.
3. Brightness button”
”
BRIGHTEST
BRIGHTER
BRIGHT
DIM
a. Press ”
” button to adjust the brightness.
b.
The setting will remain there after main switch is turn off.
Under TOTAL mode, press “S” button continuously to change between “kilometer” & ”mileage”
readings.
Summary of Contents for JET 100 series
Page 1: ...OWNER S MANUAL...
