7
•
ABS indicator light:(for ABS Model only)
Normally the ABS (Anti-lock Brake System) indicator light goes on when the ignition switch is turned on
and goes off shortly after the scooter starts moving. If the ABS is normal, it stays off. If something i s
wrong with the ABS, the indicator goes on and stays on. When the indicator light is on, the ABS does
not function but if the ABS fails, the conventional brake system will still work normally.
•
Water temperature gauge
To indicate engine coolant temperature.
When the main switch turns to “ON”, the pointer indicator should be below the (H) position when the scoot er
is running.
If the pointer indicator stays above (H) position. Please check the coolant level of spare coolant tank an d
check cooling radiator fan equipped for proper operation. Do not continue to run the engine if it i s
overheating.
CAUTION:
The indicator will stay above (H) position when engine is run under high temperature for a long period
of time. In this case, the only way to cool the engine is to stop the engine.
•
Function setting
There are two buttons on the speedometer, explanation as below :
1. “
S
” button :
a. In normal mode, press “
S
” button shortly to change between “TOTAL” & “TRIP” displays.
b. In “TRIP” display mode, press “
S
” for 2 seconds to reset the trip readings.
c. Under “TOTAL” mode and the vehicle is standing still, press “
S
” for above 2 seconds to enter CLOCK
mode. Press “
S
” button shortly to increase the hour readings, once per one time. Then press “
S
” for 2
seconds to enter tenth minute setting. Increase the tenth minute readings by pressing “
S
” button once
per one time. Again press “
S
” for 2 seconds to enter unit minute setting. Increase the unit minute
readings by pressing “
S
” button once per one time. Press “
S
” button for above 2 seconds to exit
“CLOCK” mode.
2. “
M
” button :
a. The
oil check
indicator will light in every 1,000 km, to warn the user to check (change) engine oil.
When the
oil check
indicator lit, press “
M
” button for above 2 seconds
oil check
light off.
b. Key on and press the “
M
” button shortly to switch from clock and voltage gauge.
•
EFi trouble warning Indicator
When turn the main switch key to “
”, this warning indicator will come on and then go off after the
engine is running. It displays the condition of the EFi system is working correctly. If there is any problem
on the EFi system, the warning indicator will
remain on all the time or does not come on. Please contact
with a SYM dealer to check the self-diagnosis system or electrical connections.
•
Oil Check indicator
Oil Check indicator is for showing engine oil inspection / replacement time. When the vehicle is ridden for
approximately 5,000 kilometer, engine oil indicator illuminates which means engine oil inspection or
replacement is needed. Press “
M
” (Oil Reset) button to reset engine oil used mileage. Engine oil indicator
goes off when the“
M
” button is pressed and the engine oil used mileage will be recalculated from the
current riding mileage. Engine oil level should be checked every 1,000 kilometer and replaced every 5,000
kilometer.
7.Use of Each Component
