12
○
d
Coolant Temperature Gauge
This digital coolant temperature gauge displays the temperature of engine coolant. The coolant
temperature varies with changes in the weather and engine load. If the seventh bar
○
a
goes on, when
the scooter is in operation, stop the engine and move the scooter to a safe place, and check the coolant
level in the reserve tank and the radiator fan (page 12).
○
e
Multi-function Display
When the ignition switch is turned on, battery voltage will display for approximately 10 seconds. Then the
below display mode can be shifted circularly by pushing the S button.
Push M button to switch the below display mode:
Clock
This clock displays only 24-hour mode.
To set the clock, do the below steps:
Turn the ignition switch on and wait for approximately 10 seconds until the clock displays.
Push the M button for more than 2 seconds, the hour display starts blinking. Push the S button to adjust
the hours.
NOTE :
This scooter is not equipped with a high coolant temperature indicator.
The coolant temperature gauge will not blink when the coolant temperature is too high.
Please take notice of the coolant temperature gauge when the engine is running.
NOTE :
The multi-function display always shows the previous selected mode every time you turn the ignition
switch on.
The multi-function display shows in odometer mode after the battery is reconnected.
○
a
