21
Right Handlebar Switches
○
A
Engine Stop Switch
This switch should normally remain in the
position for the scooter to operate. In an emergency, switch
to the
position to stop the engine.
○
B
Starter Button
This starter button operates the electric starter when the engine is not running. Turn the ignition switch on;
push this button while holding the front or rear brake lever to start the engine.
Left Handlebar Switches
○
A
Passing Light Button
When pushing the passing light button
, the high beam indicator goes on to signal the driver of the
vehicle ahead that you are about to pass. The passing light is shut off as soon as the button is released.
NOTE :
Even though the engine stop switch can stop the engine, it does not turn off all the electrical circuits.
Normally the engine stop switch should be used to stop the engine.
NOTE :
This scooter is equipped with a permanently lit headlight; the position light, tail light, and the license plate
light will light up once the ignition switch is turned on. The headlight will light up when the engine is
started. The above mentioned lights
cannot be turned off.
Do not leave the scooter behind too much time after turning the ignition switch on.
○
A
○
B
○
A
○
B
○
C
○
D
○
E
○
F
