38
Coolant Level Inspection / Filling
This scooter is filled with high quality coolant that is designed for the cooling system in the factory. It
contains a 50% solution of ethylene glycol based antifreeze. Position the scooter on level ground and in an
upright position. The coolant inspection window
○
A
is located under the left floor panel. The coolant level
must be between the
“FULL”
○
a
and
“LOW”
○
b
marks. Top up the coolant carefully when the level is at the
“LOW” mark.
Pull up the tip of the left floor panel mat
○
A
to remove it.
Wrap a screwdriver that covered with a protective cloth, and insert into the hole to open the
maintenance cap
○
A
.
Open the reserve tank cap
○
A
to fill in coolant.
○
A
○
A
○
A
○
a
○
b
○
A
Reverse the above steps to restore.
