10
BATTERY CHARGING INSTRUCTION
Steps for charging battery on vehicle:
1. Use the main switch to open the vehicle charging port
2. Connect the charger to charge the vehicle, which can be completed in 5 ~ 6 hours
3. Charge the battery directly, please refer to the instructions on the next page
4. After the battery is charged, please make sure that it is installed correctly (the battery is designed with
chamfering to ensure that it is installed correctly)
Steps for removing the charger:
Reverse the steps of charging.
CAUTION:
Store at room temperature. If it is not used for a long time, please put it in a dry and ventilated place
and charge it for 2 hours every 1 month
When connecting the load, it is strictly forbidden to reverse the positive and negative poles
It is strictly forbidden to dismantle the battery pack without permission, and the label is not warranted
for artificial damage
Do not put the battery into the liquid
Please use standard charger for charging. If other chargers cause lithium battery abnormality, we will
not be responsible
When unplugging and inserting the battery, the miniature circuit breaker of the body needs to be
disconnected and handled with care
WARNING:
Please turn off the power and remove the key before charging to avoid children from injury.
Please charge the battery at a cool place. Keep the battery from high temperature, sun ray, heat,
fire, and water.
Please use SYM authorized charger for charging, or the battery may result in electrolyte leakage,
heat, and explosion.
Installation of lithium battery with foreign matters in the battery box may cause smoke or fire,
resulting in casualties.
miniature circuit breaker
Battery
Battery holder
Battery charging port
