15
TIRE INSPECTION
Tires should be checked and inflated when the engine is off.
If a tire’s ground contacting curve is abnormal, check it with a
tire pressure gauge and inflate it to the
specified pressure.
Tire pressure must be checked with a tire pressure gauge when the tire is cold.
CAUTION:
If the tire pressure is insufficient, it will affect the riding range of the vehicle and the life span of the
battery and motor. Tire pressure inspection is suggested every month.
PLEASE REFER TO SPECIFICATIONS FOR STANDARD TIRE PRESSURE
Visual check tires for frontal and lateral side walls
for crack or damage.
Visual check tires for any nails or small stones
wedged in the tread.
Check the “tread wear indicator” c
ondition to see if
tread groove depth is insufficient.
A tire with a wear bar showing is worn out and
should be replaced immediately.
STEERING HANDLEBAR INSPECTION
Switch off the power and remove the key before inspecting.
Visual check the front shock absorbers for any damage.
Operate the steering handlebar up and down, and check
the front shock absorbers for noises due to bends.
Check the bolts and nuts of front shock absorbers
with wrenches for tightness.
Shake the steering handlebar up & down, left & right, and
front & rear to check if it is loosen or pulled to one side.
Check the steering handlebar if it is pulled too tight
by the brake cables.
Take your vehicle to SYM Authorized Dealer for a check or
adjustment if abnormal conditions are found.
Tread wear
indicator
Minimum tread
depth indicator
Foreign materials
(Nails or small stones)
Crack and
damage
