background image

1.Use dry and soft cloth to clean this product.

2.Avoid exposing this product to heat.

3.Do not immerse this product in water, otherwise, the electronic parts will be 

   damaged.

4.Transformers used with the toy are to be regularly examined for damage to

   the cord, plug, enclosure and other parts, and that, in the event of such damage,

   the toys must be used with this transformer until the damage has been repaired.

Precautions as follows during charging of battery:

- Avoid placing the active batteries in places with direct exposure, sunlight and

  high temperatures. For example, naked light or electrical equipment 

  installations; otherwise it may cause damages or explosions .

- Avoid immersing the batteries in the water. The batteries shall be stored in a 

  cool and dry place.

- Avoid dismantling the batteries.

- During the charging of battery, avoid leaving the charging place.

- Rechargeable batteries are to be removed from the toy before being charged

.

- Rechargeable batteries are only to be charged under adult supervision

.

The charging time is about 70 minutes; Hover flight time

is approximately 4 minutes.

Connect the battery power cord to the 

USB

then connect the USB interface to the 

computer. (The indicator light of the drone 

will turn on while charging, and turn off or flash

when charging completed. It takes about 70 

minutes to completely charge the battery. )

The following items can be found in this product package:

Drone
Remote Control
User Manual
4 Blades
USB Cable

M

obile Phone 

R

etanining Clip

Repair and Maintenance

Package Description

Battery Charging Methods for Drone

8+

1

4-CHANNEL PRESSURE FIXED POSITION HOVERING 

REMOTE CONTROL DRONE

GYRO REMOTE CONTROL SERIES

X

20W

USER MANUAL

MAIN FEATURES

● Utilizes the 4-axis structure, enabling the drone to be even 

    more flexible, speedy.It can fly indoor .

● Built-in 6-axis gyro stabilizer to ensure accurate positioning 

    in-flight.

● The structure uses a modular design which makes it easy to 

    install and repair.

● Headless function making it easy for directional control.

● Pressure-fixed-position hovering function for Auto Hover Mode.

● 360° stunt flip.

● Auto take-off and landing.

● HD wifi real-time transmission aerial for getting the fun of 

   different photography.

-2-

Summary of Contents for X20W




















Reviews: