1. Flight Preparation
Step 1: Press the power button of the remote
control.
Step 2: Press the power button on the top of
the drone to 1-2S make sure the
drone is turned “ON”.
Step 3: Push the left joystick (accelerator) up
to the highest point and then push
down to the lowest point. When
the LED indicator lights in the drone
change from quick flashing to
continuous light, it means that the
drone goes into the flight standby
mode.
Method 1: Push the left joystick (accelerator)
to the highest point and then back
to the center, the blades of the
drone start rotating slowly.
Method 2: Push the left and right joysticks
to the bottom inner corners for 1
second, and the drone can be
turned off.
2. Turning on the drone
Flight Preparation and Switching the Drone On and Off
-5-
