-1-
Safety Guide
Repair and maintenance
1. Use clean and soft cloth to clean the product.
2. Keep away the product from heat sources.
3. Avoid water exposure to this product. Moisture may cause damages of the
aircraft electronic parts.
4.Transformers used with the aircraft should be examined regularly,such as the
cord,plug,enclosure and other parts,In case of any damages is found, please
stop using it unless it is repaired or replaced.
1. Please, keep the small drone accessories out of reach of children.
2. This drone is very powerful. When flying for the first time, avoid sudden
movements of the throttle. When ascending push the throttle stick slowly up to
avoid unintended damages or injuries.
3. After flying, turn off the transmitter before turning off the drone .
4. Do not keep the batteries in high temperatures areas or near heat sources.
5. It is strongly reccomended to operate the drone at 2-3 meters away from a pilot
and other people or animals. Crashes may cause unintended injuries. When
landing the drone, avoid crashing it into other people.
6. Adult or experienced RC pilot’s supervision is reccomended for children.
7. Non-rechargeable batteries should not be recharged; Batteries should be
inserted with a correct polarity; Different types of batteries, new or used
batteries should not be mixing.
8. Turn off the drone/transmitter and remove the batteries when not in use.
9. The supply terminals are not be short-circuited
10. When not in use for more than 10 days, take measures to pro-long the drone’s
battery life by reducing the drone battery level to 40%-50% of it’s capacity
(fully charge the battery then fly the drone for half of it’s flying time).
11. Keep away from the rotating blades (rotating blades my cause bodily injuries,
or damage to property).
12. To avoid interfering with air traffic control signals avoid flying a drone within
5000 meters of an airport. Avoid operating RC equipment during the periods
set by the local authority.
13. Only use the included charger.
14. Liquids can be used to clean the product. Turn off the equipment and unplug
the charger from the power source before cleaning the drone. Perform routine
inspection of the charger (check: port, shell and other parts) on a regular
basis. If any abnormalities are found, immediately stop using the equipment
until it is fixed.
15. Attention
：
please assemble the aircraft with the guidance of adults.
16. Do not look directly into the LED lights of the drone as it can damage your
eyes.
17.Open the battery cover of the toy with screwdriver.
18.The packing has to be kept since it contains important information.
