SV3800, SV3800B, and SV3800B-20 Security Policy
2016 Symantec Corporation This document may be freely reproduced & distributed whole & intact including this copyright
notice.
16
Figure 2
–6
SV3800/SV3800B/SV3800B-20 Front Panel Controls and Display
The combination of Netmods installed in an SV3800/SV3800B/SV3800B-20 is not
important for FIPS 140-2 validation as the Netmods are all outside of the logical
cryptographic boundary (see
The back of the SV3800 is shown in Figure 2-7 and has the following elements
going from left to right:
•
2 x hot swappable power supply bays
•
Serial port (RJ45 connector)
•
VGA display connector
•
2 x USB 2.0 and 2 x USB 3.0 ports
•
2 x GigE ports each with two built in LEDs – port 1 is used for
management, port 2 is unused
Figure 2
–7.1 SV3800 Back Panel
The back of the SV3800B/SV3800B-20 differs slightly (serial port location only)
from the SV3800 and is shown in Figure 2-7.2 and has the following elements
going from left to right:
•
2 x hot swappable power supply bays
•
VGA display connector
•
2 x USB 2.0 and 2 x USB 3.0 ports
•
2 x GigE ports each with two built in LEDs – port 1 is used for
management, port 2 is unused
•
Serial port (RJ45 connector)
