CLEANING AND MAINTENANCE
10
Cleaning side brushes
Check at least once a week both side brushes together with the air intake and remove the worn hair and other dirt.
Remove the side cleaning brush from the vacuum cleaner by unscrewing the crosshead screw
Note: Before replacing side brushes, check and match ,,L” and ,,R” mark on both side brush nad bottom of robot.
Cleaning dust bin and filter
Empty the dust container after every cleaning. If the dust container is full it has a bad effect on the suction power of
the vacuum cleaner and the quality of the cleaning.
Clean the filter every 14 days by tapping, brushing or vacuuming with a standard vacuum cleaner. We recommend to
replace the HEPA filter every 6 months.
Cleaning cliff sensors and auto charging pins
Clean the charging contacts on the vacuum cleaner and on
the charging station once a month with a soft cloth. Clean
the three sensors on the bottom of the vacuum cleaner
in the same way, marked points in the wheel (see figure).
Summary of Contents for D410
