11
Q
u i
c
k
R
e f
e
r
e
n
c
e
fore the Network tab will be available.
3. To
configure
the
Conduit Setup
:
a. Select the HotSync application from the main application
screen.
b. Select the menu icon to display the options menu.
c.
Select Conduit Setup.
d. Check any items that you want synchronized and uncheck
any items that you don’t want synchronized. Then tap “OK.”
4. To
configure
the
Connection Setup:
a. Select the HotSync application from the main application
screen.
b. Select the menu icon to display the options menu.
c.
Choose the Name: Direct Serial.
d. Choose Port: Cradle.
e.
Choose Speed: 57,600 bps.
f.
Choose Flow Ctl: Automatic, Direct
g. Tap “Done.”
Creating a CRD1700-4000E Modem Sync Service
The SPT 1700 terminal communicates with the CRD1700-4000E via a
Modem Sync. The Modem Sync offers many options which must be
configured for use with the CRD1700-4000E.
Create a separate CRD1700-4000E network configuration and select it
as your default Modem Sync service. Use either Graffiti or the keyboard
feature (click in the lower left-hand corner of the scratch pad on the
abc
to access the keyboard) to enter the following information:
1. Select the HotSync application from the main application screen.
2. Choose the Select Service box under the Modem Sync icon to cre-
ate a new CRD1700-4000E service.
3. Select
the
Earthlink
service,
Click
Menu->Duplicate.
4. Change the service name to CRD1700-4000E. Leave the user
name and password blank. Choose the Direct Serial Connection
option.
