Data Collection Features
The NetVision Data Phone can collect data for many different applications. The type of data collected
depends on the network configuration. You can enter data by keypad entry or using the built-in, bar
code scanner. To scan a bar code:
1. Aim the top of the NetVision Data Phone towards the bar code. Adjust the distance to the bar code.
Hold the Data Phone farther away for larger bar codes. Optimum distance is approximately six to
ten inches (15 to 25 cm).
2. Press
SCAN
to switch to the data collection application
.
Observe that the scan beam crosses all the
bars of the bar code. The call indicator turns green and the Data Phone beeps after successfully
reading the bar code.
The scanning success depends on the quality, size of the bar code, and the scan distance and angle of
the scanner.
Do not stare into laser aperture.
