Symbol PDT 8000 Product Reference Manual Download | Manualshive

Page: 301 / 376

background image

12-27

Configuring the Terminal

RegMerge.dll

Regmerge.dll is a built-in driver that allows registry edits to be made to the Windows CE
Registry. Regmerge.dll runs very early in the boot process and looks for registry files (.reg
files) in certain Flash File System folders during a hard reset. It then merges the registry
changes that are in these files into the system registry located in RAM.

Since the registry is re-created on every hard reset from the default ROM image, the
RegMerge driver is necessary to make registry modifications persistent over hard resets.

Regmerge is configured to look in three specific folders for .reg files in the following order:

\Platform

\Application

\Data

Regmerge continues to look for .reg files in these folders until all folders are checked. This
allows folders later in the list to override folders earlier in the list. This way, it is possible to
override Registry changes made by the Platforms partitions folders. Take care when using
Regmerge to make Registry changes. The DCP for PDT8000w contains examples of .reg
files.

Note: Regmerge only merges the .reg files on cold boots. The merge

process is skipped during a warm boot.

Typically, do not make modifications to registry values for drivers loaded before RegMerge.
However, these values may require modification during software development. Since these
early loading drivers read these keys before RegMerge gets a chance to change them, the
mobile computer must be cold booted. The warm boot does not re-initialize the registry and
the early loading driver reads the new registry values.

Do not use Regmerge to modify built-in driver registry values, or merge the same Registry
value to two files in the same folder, as the results are undefined.

CopyFiles

Windows CE expects certain files to be in the Windows folder, residing in volatile storage.
Windows CE maintains the System Registry in volatile storage. CopyFiles copies files from
one folder to another on a cold boot. Files can be copied from a non-volatile partition
(Application or Platform) to the Windows or other volatile partition during a cold boot. During
a cold boot CopyFiles looks for files with a .CPY extension in the root of the Platform and
Application FFS partitions (Platform first and then Application). These files are text files

«
...
299
300
301
302
303
...
»

Summary of Contents for PDT 8000

























































































































































































































































































































































































Reviews:

No comments

Related manuals for PDT 8000

Brand: Hughes Pages: 17

Brand: Navman Pages: 69

Brand: Bluebird Pages: 86

Brand: Ecom Pages: 39

Brand: Socket Pages: 2

SoMo 655 Standard

Brand: Socket Pages: 14

Brand: Denso Pages: 219

Brand: Denso Pages: 256

Brand: Casio Pages: 37

Cassiopeia E-125

Brand: Casio Pages: 46

Cassiopeia E-200

Brand: Casio Pages: 48

Brand: Casio Pages: 89

Cassiopeia BE-300

Brand: Casio Pages: 163

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands