•
Protect the PTC from excessive heat, cold,
moisture, and harsh, dirty environments.
•
Do not insert anything other than Telxon-approved
cables into the PTC’s micro DB-15 connector.
Storing the PTC-960L
•
Do not store the PTC-960L in temperatures below
-20 degrees F (-29 degrees C) or above 140 degrees
F (60 degrees C).
•
Do not store the PTC-960L in a damp or humid
environment.
1.
Transfer any data stored in the PTC to a host
computer or another PTC or print the data. See
the manual or instructions for your organization’s
application program for directions.
2.
Make sure you have a copy of any programs
stored in the PTC.
3.
Disconnect all accessories from the PTC.
4.
Recharge the PTC’s nickel-cadmium battery pack
or replace the alkaline battery.
5.
Pack the PTC in the original packing material or
in a padded box and put it in a safe place, away
from dust, dirt, humidity, and excessive cold.
Cleaning the PTC-960L
!
Be careful not to scratch the
scanner lens when you clean it.
Scratches can reduce the scanner’s
effectiveness.
Equipment required:
•
A soft, lint-free cloth
•
A nonabrasive liquid cleaner such as Windex
®
!
Do not soak the cloth and do
not spray or pour cleaning liquids
directly onto the PTC.
To clean the PTC-960L, slightly moisten a soft, clean,
lint-free cloth with a mild nonabrasive cleaner and
wipe the outside surfaces. Do not use a paper towel.
28
