15
Q
u
i
c
k
R
e
f
e
r
e
n
c
e
blow fuse. The fuse protects your vehicle from an elec-
trical short on the power cable.
2.
Prepare the External DC power cable. One end of the exter-
nal DC power cable fits into the terminal’s DC Power connec-
tor. The other end has no connector.
a. Route the External DC power cable from the terminal lo-
cation to the connection point for your vehicle’s power
source.
Caution:
The means of routing and securing the External DC
power cable from the terminal to the vehicle power
source is extremely important. Hazards associated with
improper wiring can be severe.
To avoid unintentional contact between the wire and
any sharp edges, provide the cable with proper bush-
ings and clamping where it passes through openings. If
the wire is subjected to sharp surfaces and excess en-
gine vibration, the wiring harness insulation can wear
away, causing a short between the bare wire and chas-
sis. This can start a fire.
Plug in to the DC Power
connector on the terminal
Cable End
to be
prepared
Summary of Contents for VRC 6940
Page 1: ...V R C 6 9 4 0 T e r m i n a l...
Page 14: ...12 V R C 6 9 4 0 T e r m i n a l...
