17
Q
u
i
c
k
R
e
f
e
r
e
n
c
e
To provide power from an AC source:
1. Insert the AC line cable into the AC connector on the AC uni-
versal power supply.
2. Plug the other end of the AC line cable into an AC wall outlet.
3. Insert the DC power cable into the DC connector on the AC
universal power supply.
4. Plug the other end of the cable into the terminal’s Power
Connector.
Installation and the Internal Battery
A terminal’s internal battery may be depleted when you first install
it. The internal battery charges itself from the terminal’s main
power supply (DC or AC).
If the main power supply is stable, you can plug in the terminal and
use it immediately. If the main power supply is not stable, there
may be power interruptions that cause the terminal to reset itself
during its first few hours of operation.
If the terminal resets itself, you may lose unsaved data. To avoid
this, we recommend that you plug in the terminal and allow it to
charge for two hours before using it.
It takes 48 hours to fully charge the internal battery. A fully charged
internal battery maintains data for up to 72 hours if the unit is
disconnected from its main power source. This time is reduced if
the radio is in a mode where it maintains continuous
communication with a host.
Summary of Contents for VRC 6940
Page 1: ...V R C 6 9 4 0 T e r m i n a l...
Page 14: ...12 V R C 6 9 4 0 T e r m i n a l...
