MoniCom
WWW.SYMCOD.COM
12
Power In
Detailed Specifications
The MoniCom is provided with some ports (see Figure 2) allowing the connection to a computer.
Figure 2
MoniCom bottom view
Power button
The power button (figure 2) allows the MoniCom to be powered on or off.
Connectors
Power in:
Allows to connect to a 120 or 240VAC power network (external power supply included).
SVGA:
Allows to connect to the SVGA port of a computer (SVGA cable included).
USB:
Allows to connect the touch screen to the USB port of a computer (USB cable included). The driver
must be installed on the computer. Driver is available at
www.symcod.com
.
RS-232:
Allows to connect the touch screen to the serial port of a computer (RS-232 cable included). ELO
compatible (no additional driver needed).
ATTENTION:
To ensure proper working of the touch screen it is recommended to use only USB or RS-
232, not both at the same time.
SVGA
Figure 3
Connectors of MoniCom
USB
RS-232
