© 2010 SymCom, Inc. All Rights Reserved 3
The 777-P2-DEMO is a demonstration-only model of the 777-P2 electronic overload relay. The 777-
P2-DEMO is designed to show the functions of a standard 777-P2.
The 777-P2-DEMO must be programmed in advance by supplying power with the 12VDC power
assembly that comes with the demo unit.
CONNECTIONS
The power adapter is included. Connect the power adapter cable to the 12VDC input on the side of
the 777-P2-DEMO as shown in Figure 1. The cable is keyed for proper installation. If the cable is
connected improperly, the 777-P2-DEMO will not power the display. Connect the AC-to-DC
converter to the adapter cable.
To connect a demonstration accessory, reference the instructions at the end of this document. Refer
to Figure 2 for connections.
Figure 1: AC to DC Power Converter Setup for 777-P2-DEMO
ATTENTION!
The optional demonstration accessories are not designed for use with a standard 777-P2. Do
not connect the CIO-EN-DEMO, RM-1000-DEMO, and RM-2000-DEMO to any unit other than
a 777-P2-DEMO or a 777-KW/HP-P2-DEMO.