6
Quick Start Guide
6408 216th Street SW
|
Mountlake Terrace, WA 98043 USA
T
+1.425.778.7728
F
+1.425.778.7727
|
www.symetrix.co
Performance Data
Performance Data
ITEM
DESCRIPTION
DETAILS
INPUTS
Number of Inputs
Twelve (12), eight (8), or four (4) switchable balanced mic
or line level on Jupiter 12, 8 or 4 respectively.
Connectors
3.81 mm terminal blocks.
Nominal Input Level
+4 dBu line or -36 dBu mic level (software selectable)
with 20 dB of headroom.
NOTE:
For unbalanced analog input, either reference the minus
input terminal to the signal source ground (preferred) or ground
the minus input to the adjacent ground terminal (tie low to
ground). Using the second method deprives you of the common
mode rejection inherent in a balanced input, even when coming
from an unbalanced source.
Mic Pre-amp Gain
+40 dB.
Input Trim
+/- 24 dB.
Maximum Input Level
+23 dBu
Input Impedance
> 18 kΩ balanced, > 9 kΩ unbalanced,
> 2 kΩ with phantom power engaged.
CMRR
> 50 dB @ 1 kHz, unity gain
Mic Pre-amp EIN
< -125 dBu, 22 Hz - 22 kHz, 100 Ω source impedance.
Phantom Power
+20 VDC, 20 mA maximum per input.
OUTPUTS
Number of Outputs
Four (4), eight (8), or four (4) line level on Jupiter 12, 8 or
4 respectively.
Connectors
3.81 mm terminal blocks.
Nominal Output Level
+4 dBu line level with 20 dB of headroom.
NOTE:
For unbalanced analog output, do not connect the minus
output terminal. Unbalanced configuration results in 6 dB lower
output level.
Maximum Output Level
+24 dBu.
Output Impedance
200 Ω balanced, 100 Ω Unbalanced.
SYSTEM
Sampling Rate
48 kHz.
Frequency Response
20 Hz - 20 kHz, +/- 0.5 dB.
Dynamic Range
> 110 dB (A-Weighted), input to output.
THD+Noise
< -85 dB (un-weighted); 1 kHz @ +22 dBu with 0 dB gain.
Interchannel Crosstalk
< -90 dB @ 1 kHz, typical.
Latency
< 1.6 ms, input to output with all DSP inactive.
Summary of Contents for Jupiter 12
Page 1: ...Jupiter 4 Jupiter 8 Jupiter 12 Quick Start Guide ...
Page 2: ......
