background image

78

08/2009 Rev. 0.4        

S1000 All in One

S3000 All in One (MAXI)

S1000 / S3000 / S3000 MAXI

08/2009 Rev. 0.4

79

S1000 All in One

S3000 All in One (MAXI)

S1000 / S3000 / S3000 MAXI

Display 
messages 
and errors

Possible cause

Action

Out of order 
E8 Mixer 2 error

Mixer 2 motor stuck. Mixer 2 mo-
tor exit overload (power too high). 
Control unit has switched off the 
exit. 

Check if Mixer 2 is unclean or incorrectly 

fi

 tted. Clean and/or check whether the rotor 

can run freely. Switch the device off and on 
again.

Out of order 
E9 Mixer 3 error

Mixer 3 motor stuck. Mixer 3
motor exit overload (power too 
high). Control unit has switched off 
the exit.

Check if Mixer 3 is unclean or incorrectly 

fi

 tted. Clean and/or check whether the rotor 

can run freely. Switch the device off and on 
again.

Out of order 
E10 Valve error

Valve exit overload (power too 
high). Control unit has switched off 
the exit.

Check valves and wiring for leakage. 
Switch the device off and on again.

Out of order 
E11 Ingr. m error

Ingredient motor stuck. Ingredient 
motor exit overload (power too 
high). Control unit has switched off 
the exits.

Check the driving motor function in service 
menu 

2.7 Hardware test

. Check if car-

tridge holder is placed correctly. 
Switch the device off and on again.

Out of order 
E12 Fan error

Fan exit overload (power too 
high). Control unit has switched off 
the exits.

Check the ventilator and wiring for leakage. 
Switch the device off and on again.

Out of order 
E13 Mixer error

Brewer and Mixer exit group
overload (power too high). 
(power too high). Control unit has 
switched off the exits.

Carry out the inspection actions as 
described for E7, E8 and E9. Switch the 
device off and on again.

Out of order 
E14 Output err.

Ingredient motor and ventilator 
exit group overload (power too 
high). Control unit has switched off 
the exits.

Carry out the inspection actions as
described for E11 and E12. Switch the 
device off and on again.

Valve exit group overload 
(power too high). Control unit has 
switched off the exits.

Carry out the inspection actions as
described for E10. Switch the device off 
and on again.

Out of order 
E15 Shot error

Ingredient motor has not returned 
in its home position.

Check the micro switch and ingredient
motor function in the service menu 

2.7 

Hardware test. 

Switch the device off and 

on again.

To many shot set in recipe.

Reduce the numbers of shots.

Out of order 
E16 Level error

Electrode error; Max. and Min. 
Electrode both suddenly detect no 
water level. Inlet valve shuts. 

Make sure if the boiler does not leaks.
Check the water pressure, turn the water 
supply tap completely open and check the 
connection tube for any kinks. Switch the 
device off and on again.

7. COIN MECHANISM (OPTIONAL)

The OptiFresh is available with an optional coin 
mechanism suitable for euros (€0.05 - €2.00). Other 
currencies are available on request.
The coin mechanism can also easily be programmed to 
accept tokens.
It is also possible to have an existing device 

fi

 tted 

with the coin mechanism. The right-hand side panel is 
replaced by a wider side panel, which houses the coin 
mechanism and slot (

fi

 g. 21).

1. Coin insert
2. Return button
3. Return slot
4. Money drawer
5.  Door lock (also locks the money drawer)

7.1 Standard confi guration

Fig. 24 shows the standard con

fi

 guration of the DIL 

switches, S1-10 ON
The coin mechanism is connected to the device with a 
connector (Fig. 22A).
 

7.2 Rejecting coins

If desired, certain types of euro coins can be rejected by 
using DIL-Switch block S1 + S2 (

fi

 g. 22).

Coin

DIL   +

DIL    

€ 0,05

S1-1

S1-7

€ 0,10

S1-2

S1-8

€ 0,20

S1-3

S2-1

€ 0,50

S1-4

S2-2

€ 1,00

S1-5

S2-3

€ 2,00

S1-6

S2-4

Token 607

   -

S2-5

Token Eagle

   -

S2-6

Token new

   -

S2-7

Token new

   -

S2-8

ON = rejected / OFF = accepted

Example: Reject €1 and €2 euro coins (

fi

 g. 23)

  S1-5,   S2-3 -> ON (€ 1,00 rejected)

  S1-6,   S2-4 -> ON (€ 2,00 rejected)

S1

S2

A

S1

S2

Fig. 21

Fig. 22

Fig. 23

Summary of Contents for S1000 All in One























Reviews: