Symfony WebPal
®
10
User Manual
Page 7
d) System Properties Set Up
i. Click on
“System”;
the System Properties window will appear.
ii. Click
“General”
, the System information will be displayed. Then click on
“OK”
at the top of
the window for confirmation.
iii. Click
“Memory”,
you can adjust the allocation of unused RAM to run programs or for storage
(by moving the arrow to the right or left). After changes, click on
“OK”
at the top of the
window for confirmation.
iv. The System Properties Set Up procedure is completed.
Note
: This feature may not be persistent over power cycles.
e) System Software Update
i. Click on
“Update”;
the Update window will appear.
ii. Provide appropriate information in the blank fields, click
“Update”
button, and the device
will be updated with specified software from specified server automatically. Follow any
displayed instructions. After finishing with the loading process, click on
“OK”
at the top of
the window for confirmation.
CAUTION for “Update” Function
To avoid system crashes and irrecoverable states, you must:
•
Use AC power instead of Battery power when the device software is being updated.
•
NOT turn the system OFF when the device software is being updated.
NOTE:
It is advisable that you
restart
the device
before
performing the Update function, or
at least close
all opened applications.
Reading and Sending E-mail
You may choose to use the local email client (Inbox) instead of a web-based email solution.
f) Inbox Configuration
.
i. Open the Inbox program.
ii. Go to the Services tab, select
“Options”.
After you click on
“Options”
you will see in a new
window five tabs, which are:
“Services”, “Compose”, “Read”, “Delete”
and
“Storage”.
iii. Select
“Services”,
click
“Add”,
choose which type of email service do you have,
“IMAP”
or
“POP3”,
and select one.
iv. In the Setup Mail definition (IMAP or POP3) you must provide the information required
“Connection”, “Server
”,
“User ID”,
and
“Password”.
If you don’t have this information
contact your Network Administrator.
v. Click
“Next”.
Configuring the WebPAL
®
