DOC06501_Revision
F
ATS-6501 Users Guide
64
[pps_width] 1.000000000000000e-04
[type] pps
[2]
[pps_period] 1
[pps_width] 1.000000000000000e-04
[type] pps
[3]
[format] B
[signal_word] 0
[type] irig
[4]
[format] B
[signal_word] 0
[type] irig
To check the status of the output card use the
status hardware:outputs:slots:N
command
(where N=Card Slot #) to verify the card status.
[ports]
[1]
[status] good
[2]
[status] good
[3]
[status] good
[4]
[status] good
[power] enabled
[type] 4387A
6.2.11 NASA36 Outputs
The ATS-6501 is capable of providing NASA 36 Time Code outputs on each port of the
4387A AM IRIG card. The 4387A outputs are set to IRIG B120 by default. Users can modify
these settings. Users are cautioned to ensure they connect the correct cables to the correct output
ports to avoid any problems.
To verify the settings use the
settings hardware:outputs:slots:N
command (where
N=Card Slot #) to verify the system settings.
ATS-6501>settings hardware:outputs:slots:5
[tsc4387]
[ports]
[1]
[format] B
[signal_word] 120
[type] irig
[2]
[format] B
[signal_word] 120
[type] irig
[3]
[format] B
[signal_word] 120
[type] nasa36
[4]