DOC06501_Revision
F
ATS-6501 Users Guide
83
Query:
ATS-6501>
list_logs (ftp / rt)
This command lists all of the current gps logging configuration files saved by the user. The
user must specify ftp or rt for the log type.
Diag:
Description:
Sets the current diagnostic message type (error/info/debug) for the three
internal (clock/gps/kas2/timecode/tsc4370) systems monitored by the ATS-6501. This
command specifies what message types will be sent to Port 1800. The default message
type is info.
Syntax
: diag (clock / gps /kas2 /timecode / tsc4370) (error / info /debug)
Command Example:
ATS-6501>diag gps debug
Query:
ATS-6501>settings diaglog
[clock] info
[gps] debug
[kas2] info
[timecode] info
[tsc4370] info
Diag_port:
Description:
Switches the current telnet session from the Command Port (1700) to the
Diagnostic Port (1800).
Syntax
: diag_port
Command Example:
ATS-6501>diag_port
To end this session and return to the command port type
quit
and press enter.
Fix Position:
Description:
Sets the ATS-6501 position to the current GPS coordinates <current> or to
the settings entered by the user [nf]. When entering the position manually users must enter
all three values (latitude, longitude, and altitude). The ATS-6501 will respond with “OK”
when the settings have been accepted. The command will only accept the values in decimal
format and latitudes in the southern hemisphere and longitudes in the western hemisphere
must be preceded with a (-) sign.
Syntax
: fix_position <current> or [nf (latitude] [nf (longitude)] [nf altitude)]
Note:
Once this command is executed, the positioning mode will be manual.
