518 TimeProvider 5000 User’s Guide
098-00028-000 Revision F – May, 2012
Appendix F PTP Probe Option
Provisioning the Probe
See
for procedures to set the lease duration.
Table F-10. Set Lease Duration Procedures
TimeMonitor PDV
CLI Command
1. Click on the
Command
radio button to put
TimeMonitor PDV into the proper mode for
making Probe changes.
2. Click the Login button to login to the Probe.
The Probe will prompt for Username and
Password.
3. In the Duration box (see Item 5), enter the
desired value for the lease duration in seconds.
Use the command:
set ptp-probe IOC1-x
active-probe duration <value>
where x is the port number on the IOC card
Example:
For a duration of 500 on Port 1 of IOC1:
1. Login at the Admin or Config-user
level.
2. Type
set ptp-probe ioc1-1
active-probe duration 500
and
press
Enter
.
Summary of Contents for TimeProvider 5000
