![background image](http://html.mh-extra.com/html/symmetricom/timesource-3100/timesource-3100_user-manual_1419605178.webp)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
4
178
TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
Retrieve Performance Monitoring (cont’d)
Note:
PHASE1S Data types:
•
One 15 minute bin from the last 24 hours of data is displayed as 900 seconds of data.
To select a 15 minute bin, enter mondat and montm. Any mondat/montm
combination outside of the past 24 hour window is denied. Any time increment may
be entered. The system rounds the value to the nearest bin.
•
Entered minutes of 1 to 15 correspond to the first 15 minute bin, 16 to 30 correspond
to the second 15 minute bin, etc.
•
The first monitor value is the first second of the 900 second window.
•
The 900 seconds of data is broken into 9 groups of 100 seconds. For each group of
100 seconds, the first value is the absolute 1 second phase for that group. The
absolute 1 second phase value is followed by 99 seconds of delta phase values.
Summary of Contents for TimeSource 3100
Page 1: ...TimeSource 3100 GPS Primary Reference Source 097 72020 01 Issue 9 November 2003 ...
Page 49: ...3 Chapter Installation This chapter provides the steps required for installation and power up ...
Page 109: ...Chapter 4 TL1 Reference This chapter provides information for using the TL1 language ...
Page 203: ...Chapter 6 Specifications This chapter provides equipment specifications ...