![background image](http://html.mh-extra.com/html/symmetricom/timesource-3100/timesource-3100_user-manual_1419605097.webp)
3
TimeSource 3100
97
Installation
097-72020-01 Issue 9: November 2003
2
5
3
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
14
Click the ver Unknown button to open the Load TS3000 File dialog box,
which appears very similar to the dialog box shown in Step 9.
15
In the Load TS3000 File dialog box, navigate to the TS3000.hex firmware
file to be downloaded, then click the Open button.
After the Open button is clicked, the message “
Verifying version
for C:\
directory
\ts3000.hex (approx 30 secs)
” appears in
the Command area of the screen. Once TimeWizard has verified that the
version of the firmware is correct, the text on the ver Unknown button
changes to show the version of the firmware to be downloaded.
After TimeWizard verifies the firmware version, select the Download
TS3000.hex check-box, then click the Next>> button to start the firmware
download operation.
16
When the firmware download operation starts, the Download Progress
dialog box appears.
As the download operation proceeds, the value in the Packet field
increases, and the Progress bar shows the progress of the operation.
When the firmware download is complete, the Download Progress dialog
box closes.
After
the Download Progress dialog box closes, continue with the next
step.
Notes:
1. The firmware download operation can be aborted at any time by
clicking the Cancel button in the Download Progress dialog box.
2. If the download fails for any reason, a screen appears with instructions
to contact Symmetricom. If this happens, exit the application, check the
cable connections, and restart TimeWizard.
Procedure F. TimeWizard Installation and Operation (cont’d)
Step
Procedure
Summary of Contents for TimeSource 3100
Page 1: ...TimeSource 3100 GPS Primary Reference Source 097 72020 01 Issue 9 November 2003 ...
Page 49: ...3 Chapter Installation This chapter provides the steps required for installation and power up ...
Page 109: ...Chapter 4 TL1 Reference This chapter provides information for using the TL1 language ...
Page 203: ...Chapter 6 Specifications This chapter provides equipment specifications ...