F108 – Oscillator Configuration
F108 – Oscillator Configuration
Use function F108 to display the type of oscillator being used:
•
TCXO
•
OCXO
For oscillator specifications, see
“Oscillators” on page 18
.
Command Line
The oscillator type is defined by the hardware configuration of the clock, and is not
configurable through the command line or keypad user interfaces. To request the oscillator
configuration, enter:
F108<S><CR>
XL-GPS responds:
F108<S>OSCILLATOR<S>CONFIG<S><OSC><CR><LF>
where:
F
= ASCII character F
108
= Function number
<S>
= ASCII space character one or more
<CR>
= Carriage Return, equivalent to pressing the Enter key on a keyboard
<OSC>
= Oscillator type: TCXO, OCXO
For example, enter the following string:
F108<CR>
XL-GPS responds (example):
F108 OSCILLATOR CONFIG TCVCXO<CR><LF> (or OCXO)
098-00116-000 Rev. A
...............................
Page 127 of 221
Summary of Contents for XL-GPS
