11
Seat
Warning! Do not carry out this adjustment while a user
is placed in Meywalk®4
.
Adjust the seat height
according
to the length of the user’s legs. Turn the
lower thumb screw
located at the front of Meywalk®4. The thumb screw features a
“child lock” which is released by simultaneously pressing and
turning. When released, the seat can be adjusted up or down.
Position the seat at the correct height. Hold your hand under
the seat bar bottom to make the seat slide easily up and down.
Re-tighten the thumb screw when the desired height has been
found.
Trunk support height
Adjust the trunk support
according to the individual user’s
height. Turn the
upper thumb screw
located at the front of
Meywalk®4. The thumb screw features a “child lock” which is
released by simultaneously pressing and turning. When released,
the trunk support can be adjusted up or down until the correct
height has been found. Re-tighten the thumb screw.
Trunk support replacement
Warning! Do not carry out this adjustment while a user
is placed in Meywalk®4
.
For trunk support replacement
,
loosen the two Allen screws in front of the support. The two
screws fit all trunk supports. The trunk support is available in
five variants: Circumference 70, 90, 105, 120 and 130 cm.
Summary of Contents for Meywalk 4 Large
Page 1: ...User Handbook ...
Page 19: ...19 TECHNICAL AND ACCESSORIES ...