12
Tilt function
Warning! Do not carry out this adjustment while a user
is placed in Meywalk®4
. By means of the
tilt function
the
user’s posture can be changed. Turn the
middle thumb
screw
to tilt the support. The thumb screw is located at the
front of Meywalk®4. While turning the screw, you can change
the angle of the trunk support and seat up to 15°. The tilt
function is continuously adjustable.
Getting in and out
Featuring a unique lifting and lowering system Meywalk®4 has made it easier for the user to
get in and out. Grab the front of the swing bar with both hands and tip it up. This way the
seat will be lowered approx. 11 cm for Small, 13 cm for Medium and 22 cm for Large. When
the user has been seated, close the trunk support and pull up the rear stop. The seat is lifted
by pushing down the swing bar until it locks with an audible click. The integrated
gearing in
the lifting and lowering system means that the downward pressure need only be about one
third of the user’s weight.
Summary of Contents for Meywalk 4 Large
Page 1: ...User Handbook ...
Page 19: ...19 TECHNICAL AND ACCESSORIES ...