www.
HHStandingChair
.co.uk www.
Symmetrikit
.com
Resetting your chair
1
Press the top two buttons and hold them for 10 seconds, the
chair will enter manual mode and you will notice a change in
the note of the beeping tone
2 Adust each function as follows:
seat fully down
leg rest fully in
back rest fully reclined (down)
Do not push any buttons for 10 seconds
3 Normal function should now be resumed: test the chair by
pressing ‘STAND’
Should you still have an issue with your chair, please contact your local supplier.
Cleaning your chair
•
Before cleaning the chair, remove the mains cable from the wall socket
•
Dust and dirt can increase the wear and tear on the fabric, we recommend you
brush/vacuum the chair regularly
•
If the upholstery is exposed to direct sunlight for long periods of time it will likely
fade, where possible use blinds/curtains for protection
•
Fabric upholstery has practical Stain Guard finish. When using fabric/upholstery
cleaner, always check manufacturers’ instructions and test on an inconspicious area
first
•
Cuero upholstery should be wiped down using a damp, clean cloth with a solution
of mild detergent and lukewarm water
•
The seat cushion is spilt into 2 sections and both covers are removable. They can
be machine washed at 40°C using non biological detergent and air dried or tumble
dried on a LOW setting
•
The frame of the chair can also be cleaned with a damp cloth and mild detergent
if required. Please take care to keep the power system dry;
ensure all electrical
components are dry before reusing the chair
DO NOT SIT IN THE CHAIR DURING THIS PROCESS
