Symmetry EN-7500 Series
EN-7530 Installation Guide
9600-0545 Issue 1.1
Page 7 of 21
4. INSTALLATION
Note
i
When assembling the main body of the camera and its dome cover,
make sure they fit each other into place.
1)
Connect the LAN cable, power
supply cable, and the video loop out
cable with the camera.
2)
Place the installation template on
the ceiling.
3)
Drill three holes on the template
and insert anchor blocks into the
holes. Fasten the camera with
screws.
4)
Put the dome cover on the main
body of the camera. Make sure the
main body and the cover fit each
other into place.
5)
Fasten the cover with screws.