Symmetry EN-7500 Series
EN-7530 Installation Guide
9600-0545 Issue 1.1
Page 9 of 21
4.2. Manual adjustment for 3-axis movements
After installation, manually adjust the inner mechanism. Perform 3-axis movements
manually by turning the inner mechanism as shown above, and check if it moves
correctly. .
4.3. Setting the Image Attribute
You can set the image attribute of camera through the webpage.
The menu of image attribute can be seen under
Setup > Video & Audio > Video-in >
Attribute Setting
. Brightness, contrast, hue, saturation and sharpness can be adjusted.
4.4. Operating the OSD Menu
To operate the OSD of camera, refer to the
”
EN-7530
OSD Menu Control Manual
” on
the CD supplied with your manual.