Rinnai Australia
19
Operation & Installation Manual
HOW TO OPERATE YOUR HEATER
TO BEGIN PROGRAMMING
With the controller ‘OFF’, press and hold the
‘P’
button for 2 seconds to initiate programming. The LCD will display
‘PROG’. ‘Pd’
and the time at which the controller is currently set will flash. Period 1 can now be set.
Setting the day of the
week
(days of the week flash)
Step 1. Press and release the
‘UP’
or
‘DOWN’
button to change the
day of the week.
Step 2. Press and hold the
‘UP’
or
‘DOWN’
button for 2 seconds to
increase the day of the week by 1 day.
Scrolling order is as follows:
MO
TU
WE
TH
FR
MO TU WE TH FR
SA
SU - SA
SU
MO TU WE TH FR SA.
Step 3. To accept the selected day/s of the week press
‘
OK’.
Setting the hour ‘ON’
(time and hours flash)
Step 1. Press and release the
‘UP’
or
‘DOWN’
button to increase or
decrease the hour setting by 1 hour.
Step 2. Press and hold the
‘UP’ or ‘DOWN’
button for 2 seconds or
longer to increase or decrease the hour setting by 1 hour
every 0.5 seconds. Press
‘OK’
to accept and select the
minute.
Setting the minute
function
(time and minutes flash)
Step 1. Press and release, or press and hold the
‘UP’
or
‘DOWN’
button to increase or decrease the minute setting by 1 minute
similarly to the hour setting.
Step 2. Press
‘OK’
to accept and select the day of the week.
Setting the run period
starting time
Step 1. After setting the day the AM/PM settings will flash. To set the
‘
P1’
starting time, press and release the
‘UP’
or
‘DOWN’
button for the hour setting. Ensure that the AM/PM is set
correctly.
Step 2. To accept press
‘OK’.
Step 3. The minute setting will now flash, adjust as in Step 1 and
press
‘OK’
to accept.
Setting the temperature
(set and temperature
flash)
Step 1. After setting the time period the temperature will flash. Press
and release the
‘UP’
or
‘DOWN’
button to adjust the
temperature to the desired setting. If you do not require the
heater to come ON during a period, adjust the temperature
‘DOWN’ until
°C is displayed.
Step 2. To accept press
‘OK’
.
Period 1 is now set for the day/s of the week you have
chosen.
The LCD will display ‘
P2’
to indicate Period 2 can now be set
for the same day/s of the week.
Repeat programming process for remaining periods.
The controller will automatically turn ‘OFF’.
MO TU WE TH FR SA
SET
PROG
SET
PROG
°
MO
SET
PROG
°
SET
PROG
°
SET
PROG
°
