Hand Control Programming-TDH14P
Version 1
．
October 2018
6 of 9
6
5.
Setting the upper and lower height limit
A.
Setting upper height limit:
(1)
Adjust the desk to the preferred height of upper limit.
(2)
Press
+
and
–
buttons together and then release
–
button within 3 seconds.
(Note1)
(3)
Re-press
–
for more than 3 times in a slow pace.
(4)
A beeping sound will notify you that the process has completed.
B.
Disable upper limit of height:
(1)
Move the desk to the height of upper limit that is being set.
(2)
Repeat the operation above #2~5 to disable the upper limit setting.
C.
Setting lower height limit:
(1)
Adjust the desk to the preferred height of lower limit.
(2)
Press
+
and
–
buttons together and then release
+
button within 3 seconds.
(Note 1)
(3)
Re-press
+
for more than 3 times in a slow pace.
(4)
A beeping sound will notify you that the process has completed.
D.
Disable lower limit of height:
(1)
Move the desk to the height of lower limit that is being set.
(2)
Repeat the operation above #2~5 to disable the lower limit setting.
Note 1: Over 3 seconds will direct to “Reset” mode.
