background image

1

INDEX

The information in this document reflects products at the date of printing. The manufacturer reserves the right,  subject to all applicable laws, at any time, at its sole discretion, and 

without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the for-

going from the market. All information in this document is provided “as is” without warranty of any kind, either expressed or implied, including but not limited to any implied war-

ranties of merchantability, fitness for a particular purpose, or non-infringement. The manufacturer assumes no responsibility for errors or omissions in the information presented 

in this document. In no event shall the manufacturer be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever arising out of 

or in connection with the use or performance of this information. The tradenames, trademarks, logos and service marks presented in this document, including their design, are the 

property of the manufactureror other third parties and you are not permitted to use them without the prior written consent of the manufacturer or such third party as may own them.

TECHNICAL DATA

PACK CONTENTS

PRE-INSTALLATION INFO

4-6 INSTALLATION
7-8 

SETTINGS ADJUSTMENT WITH REMOTE CONTROL

BATTERY REPLACEMENT (BATTERY MODELS ONLY)

10 MAINTENANCE
  

Filters cleaning instructions

 

Care and cleaning of chrome and special finishes

                

Solenoid valve servicing

11             

SPARE PARTS LIST

12 

LIMITED WARRANTY

13 

     TROUBLESHOOTING

TECHNICAL DATA

BATTERY POWERED

S6360B

ELECTRICAL POWERED

S6360E

BATTERY POWERED WITH MIXER

S6360BM

ELECTRICAL POWERED WITH MIXER

S6360EM

Power supply:

6 x 1.5V AA batteries or 12V transformer

Recommended water 

pressure:

0.5-8.0 bar (7-116 PSI)

With water pressure of more than 8 bars,

use a pressure reducing valve for reduction.

Preset sensor range:  

200 mm / 7.87” (customizable with optional remote control)

Minimum sensor range: 

80 mm / 3.15”

Maximum sensor range: 

300mm / 11.81”

Security time:

90 seconds (can be reduced with optional remote control)

Hot water temperature:

Max 70˚C

Summary of Contents for DURO ACTIVESENSE S6360B










Reviews: