2
3
PACK CONTENTS
DURO ACTIVESENSE
Familiarize yourself with the part names and confirm that the parts are included.
1 x Faucet and attachments
1 x Faucet and attachments
OR
1 x Allen Key
Battery box for
6 X 1.5V batteries
B VERSIONS
E VERSIONS
12V transformer
0.35 GPM and 1.0 GPM
aerators
DURO ACTIVESENSE WITH MIXER
2 x Filters
1 x Filter
2 x Allen Keys
PRE-INSTALLATION INFO
CHECK CONTENTS
Separate all parts from the packaging and check each part with the “Pack contents” section.
Pay attention to the different models variations.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your electronic faucet until you obtain the
missing parts.
WARNINGS
Do not install facing a mirror or any other electronic system operated by an infrared sensor.
To prevent reflection problems, it is recommended to keep a minimum distance of
1.50 meters between the faucet and any other objects.
PREPARATION FOR INSTALLATION
Flush water supply lines thoroughly before installing the faucet. Do not allow dirt, Teflon tape or
metal particles to enter the faucet.
Shut off water supply.
Installations in Australia and New Zealand must comply with the requirements of AS/NZS 3500.
IMPORTANT
All plumbing is to be installed in accordance with applicable codes and regulations.
RECOMMENDED HOLE SIZE
Ø
29mm [1-1/8
"
] min
Ø
35mm [1-6/16
”
] max
[7/8"]
21mm
[7/
8"]
21
mm
[7/
8"]
21
mm
[7/8"]
21mm